LIST OF PUBLICATIONS

Books    Patents    Journal    Conference    Presentations    Reports

BOOKS

  1. E. J. Barbero, Introduction to Composite Materials Design–Second Edition, CRC, Boca Raton, FL, 2010.
  2. E. J. Barbero, Finite Element Analysis of Composite Materials, CRC, Boca Raton, FL, 2007.

BOOK CHAPTERS

  1. E. J. Barbero, Chapter 2: Time-temperature-age Superposition Principle for Predicting Long-term Response of Linear Viscoelastic Materials, in Creep and fatigue in polymer matrix composites, R. M. Guedes (editor), Woodhead, Cambridge, UK, 2010.
  2. E. J. Barbero, Ford, K. J. and Mayugo, J. A., Modeling Self-healing of Fiber-reinforced Polymer-matrix Composites with Distributed Damage, Ch. 9 in Self-healing Materials, S. K. Ghosh (Ed.) (2009) Wiley-VCH, ISBN 978-3-527-31829-2
  3. X. Martinez, S. Oller and E. J. Barbero, Study of Delamination in Composites by Using the Serial/Parallel Mixing Theory and a Damage Formulation, ECCOMAS Series Mechanical Response of Composites, Chapter 6, pp. 119-140, Springer, Dordrecht, Netherlands, 2008.
  4. L. A. Godoy and E. J. Barbero, Inestabilidad De Compuestos Laminados: Modelado Computacional Mediante La Teoria General De Estabilidad Elastica, in Análisis y cálculo de estructuras de materiales compuestos, Editor: S. Oller (Spain), 2001.
  5. E. J. Barbero, Chapter 46: Construction, pp. 982-1003, in Handbook of Composites, 2nd Ed., Stan Peters, Ed., Thompson Science/Chapman & Hall, 1998.
  6. H. V. S. GangaRao and E. J. Barbero, Construction, Structural Applications  a chapter in the International Encyclopedia of Composites, S. M. Lee, Ed., Vol. 6, 173-187, 1991.

PATENTS

  1. Modular Fiber Reinforced Polymer Composite Deck System, US Utility Patent Number 6,455,131 issued September-24-2002.
  2. Modular Fiber Reinforced Polymer Composite Deck System, US Utility Patent Number 6,544,624 issued April-08-2003.

JOURNAL PUBLICATIONS

PUBLICATIONS IN REFEREED JOURNALS (2013)

1.      E. J. Barbero, F. A. Cosso, R. Roman, T. L. Weadon, Determination of Material Parameters for Abaqus Progressive Damage Analysis of E-Glass Epoxy Laminates, Composites Part B, 46(March 2013), 211–220, http://dx.doi.org/10.1016/j.compositesb.2012.09.069

2.      S. Chen, X. Song, X. Chen, Y. Chen, E. J. Barbero, E. L. Thomas, and P. N. Barnes, Effect of Precursor Calcination Temperature on The Microstructure and Thermoelectric Properties of Ca3Co4O9 Ceramics, J Sol-Gel Sci. Technol. (2012) 64:627–636, http://dx.doi.org/10.1007/s10971-012-2894-4

3.      E. J. Barbero and F. A. Cosso, Benchmark Solution for Degradation of Elastic Properties due to Transverse Matrix Cracking in Laminated Composites, Composite Structures, 98(April 2013), 242–252, http://dx.doi.org/10.1016/j.compstruct.2012.11.009

4.      E. J. Barbero, E. M. Sosa, X. Martinez, J. A. Gutierrez, Reliability design methodology for confined high pressure inflatable structures, Engineering Structures, 51 (2013) 1–9, http://dx.doi.org/10.1016/j.engstruct.2013.01.011  

5.      Adumitroaie, A. and Barbero, E. J., Intralaminar Damage Model for Laminates Subjected to Membrane and Flexural Deformations, Mechanics of Advanced Materials and Structures, accepted.

6.      E. J. Barbero and F. A. Cosso, Determination of Material Parameters for Discrete Damage Mechanics Analysis of Carbon-Epoxy Laminates, Composites Part B  (2014) pp. 638-646, http://dx.doi.org/10.1016/j.compositesb.2013.08.084

 

PUBLICATIONS IN REFEREED JOURNALS (2012)

1.     Campo, F. and Barbero, E. J., Sol-Gel Simulation--I: Scattering Response, J. Non-crystalline Solids, 358(4), 2012, 721–727, http://dx.doi.org/10.1016/j.jnoncrysol.2011.10.023

2.     Barbero, E. J. and Campo, F., Sol-Gel Simulation--II: Mechanical Response, J. Non-crystalline Solids, 358(4), 728–734, http://dx.doi.org/10.1016/j.jnoncrysol.2011.12.005

3.     Gutierrez, J. M., E. J. Barbero, D. R. Cairns, V. H. Mucino, and J. A. Mayugo, Dynamic Roughness and Power Dissipation of Polymer Films Actuated with Liquid Crystal Polymer Inclusions, Smart Mater. & Structures, Volume 21, Nov. 2012, Pages 1—11,  http://dx.doi.org/doi:10.1088/0964-1726/21/1/015003 

  1. Adumitroaie, A. and Barbero, E. J., Stiffness and Strength Prediction for Plain Weave Textile Reinforced Composites, Mechanics of Advanced Materials and Structures, 19:169–183, 2012. http://dx.doi.org/10.1080/15376494.2011.572245
  2. Song, X., Chen, Y, Chen, S., Barbero, E. J., Thomas, E. L., and Barnes, P., Significant enhancement of electrical transport properties of thermoelectric Ca3Co4O9+d through Yb doping, Solid State Comm., 152(16), 2012, 1509–1512, http://dx.doi.org/10.1016/j.ssc.2012.06.014

PUBLICATIONS IN REFEREED JOURNALS (2011)

  1. Barbero, E. J., Sgambitterra, G., A. Adumitroaie, and X. Martinez, A Discrete Constitutive Model for Transverse and Shear Damage of Symmetric Laminates with arbitrary Stacking Sequence, Composite Structures 93 (2011) 1021–1030, http://dx.doi.org/10.1016/j.compstruct.2010.06.011
  2. Sgambitterra, G., Adumitroaie, A., Barbero, E. and Tessler, A., A robust three-node shell element for laminated composites with matrix damage, Composites Part B, 42 (2011) 41—50, http://dx.doi.org/10.1016/j.compositesb.2010.09.016
  3. Adumitroaie, A. and Barbero, E. J., Beyond Plain Weave Fabrics - I. Geometrical Model, Composite Structures 93 (2011) 1424–1432. http://dx.doi.org/10.1016/j.compstruct.2010.11.014 - See also the ERRATA
  4. Adumitroaie, A. and Barbero, E. J., Beyond Plain Weave Fabrics - II. Mechanical Properties, Composite Structures, Composite Structures 93 (2011) 1449–1462. http://dx.doi.org/10.1016/j.compstruct.2010.11.016
  5. Campo, F.A. Rivas Murillo, J.S. and Barbero, E.J., Aggregation Model for the Gelation of a Sol Starting from the Processing Conditions, J. of Non-Crystalline Solids 357 (2011) 2046–2053. http://dx.doi.org/doi:10.1016/j.jnoncrysol.2011.02.025
  6. Martinez, X., Oller, S., and Barbero, E. J., Caracterizacion de la delaminacion en materiales compuestos mediante la teoria de mezclas serie/paralelo, International Journal of Numerical Methods for Analysis and Design in Engineering, Revista Internacional de Metodos Numericos Para Calculo y Diseño en Ingenieria, 2011; 27(3):189-199. http://dx.doi.org/doi:10.1016/j.rimni.2011.07.001

PUBLICATIONS IN REFEREED JOURNALS (2010)

  1. Cortes, D. H. and Barbero, E. J., Stiffness Reduction and Fracture Evolution of Oblique Matrix Cracks in Composite Laminates, Annals of Solid and Structural Mechanics, published online May, 2009 as http://dx.doi.org/10.1007/s12356-009-0001-5, print 1(1): 29-40, Jan. 2010.  
  2. Barbero, E. J. and D. H. Cortes, A Mechanistic Model for Transverse Damage Initiation, Evolution, and Stiffness Reduction in Laminated Composites, Composites Part B, Web: Oct. 8, 2009 as http://dx.doi.org/10.1016/j.compositesb.2009.10.001, print:  41(2) 124–132, March 2010.
  3. Rivas Murillo, J. S., Bachlechner, M. and Barbero, E. J., Structure and Mechanical Properties of Silica Aerogels and Xerogels Modeled by Molecular Dynamics Simulation, http://dx.doi.org/10.1016/j.jnoncrysol.2010.03.019, Journal of Non-Crystalline Solids, 356(25-27), 1325-1331, June 2010.

PUBLICATIONS IN REFEREED JOURNALS (2009)

  1. Marques, S. P. C., Barbero, E. J., and Rivas Murillo, J. S., Analysis of Conduction-Radiation Problem in Absorbing and Emitting Nongrey Materials, I.J. for Numerical Methods in Heat and Fluid Flow, 19(2):165-181, Feb. 2009, http://www.emeraldinsight.com/0961-5539.htm .
  2. Barbero, E. J., Prediction of Long-Term Creep of Composites from Doubly-Shifted Polymer Creep Data, J. Composite Materials, Web: July 30, 2009 as http://dx.doi.org/10.1177/0021998308098239, print: 43(19): 2109-2124, Sept. 2009.

PUBLICATIONS IN REFEREED JOURNALS (2008)

  1. Liu, X., Xu, J., Barbero, E. J., Cao, W-D., Kennedy, R. L., Effect of thermal treatment on the fatigue crack propagation behavior of a new Ni-base superalloy, Materials Science and Engineering A 474 (2008) 30-38., January. http://dx.doi.org/10.1016/j.msea.2007.05.033.
  2. Jing Xu, Xingbo Liu, Mark A. Bright, James G. Hemrick, Vinod Sikka, and Ever Barbero, Reactive Wetting of an Iron-base Superalloy MSA 2020 and 316L Stainless Steel by Molten Zinc-Aluminum Alloy, Metallurgical and Materials Transactions, 39(A), 1382—1391, June 2008.
  3. Barbero, Ever J., Journal Paper Requirement for PhD Graduation, Latin American and Caribbean Journal of Engineering Education, 2(2=July-Dec) 51-53 (2008) http://academic.uprm.edu/laccei/index.php/journal

PUBLICATIONS IN REFEREED JOURNALS (2007)

  1. Barbero, Ever J. and Kevin J. Ford, Characterization of Self-Healing Fiber-Reinforced Polymer-Matrix Composite with Distributed Damage, Journal of Advanced Materials, 39(4), October 2007, pp. 20-27.
  2. Xu, J., Bright, M. A., Liu, X. and Barbero, E. J., Liquid Metal Corrosion of 316L stainless steel, 410 stainless steel, and 1015 carbon steel in a molten zinc bath, Metallurgical & Materials Transactions A, vol. 38(A), 2727—2736, November (2007).
  3. Xu, J., Liu, X., Barbero, E. J., Hemrick, J., and Peters, M., Wetting and Reaction Characteristics of Al2O3/SiC Composite Refractories by Molten Aluminum and Aluminum Alloy, Int. J. Appl. Ceram. Technol., 4[6] 514-523 (2007) Nov-Dec.  

PUBLICATIONS IN REFEREED JOURNALS (2006)

  1. Kang, B. S.-J. , Yao, Z., and Barbero, E. J., Post-Yielding Stress-Strain Determination Using Spherical Indentation, Mechanics of Advanced Materials and Structures, 13:129-138 (2006) (Jan).
  2. Xu, J., Liu, X.?, and Li, X., Ever Barbero, and Dong, C., Effect of Sn Concentration on the Corrosion Resistance of Pb-Sn Alloys in H2SO4 Solution, Journal of Power Sources, 155 (April 2006) 420-427.
  3. Barbero, E. J., Lonetti, P. and Sikkil, K. Finite Element Continuum Damage Modeling of Plain Weave Reinforced Composites, Composites part B, 37 (2006) 137-147 (March).
  4. Barbero, E. J. and Ford, K. J. (2006)  Determination of Ageing Shift Factor Rates for Field-Processed Polymers, SAMPE J. of Advanced Materials, 38(2) April, 7-13.
  5. Barbero, Ever J.; Trovillion, J.; Mayugo, J.A.; Sikkil, K.K., Finite element modeling of plain weave fabrics from photomicrograph measurements, Composite Structures, v 73, n 1 (May) 2006, p 41-52.

PUBLICATIONS IN REFEREED JOURNALS (2005)

  1. Liu, X., Xu, J., Deem, N., Chang, K-M, Barbero, E. J., Cao, W-D, Kennedy, R. L., Carneiro, T.,  Effect of Thermal-Mechanical Treatment on the Fatigue Crack Propagation Behavior of Newly Developed ALLVAC 718PLUS Alloy, Superalloys 718-625-706 and Derivatives, E. A. Loria Ed., TMS (2005).
  2. Barbero E. J., Greco F.,Lonetti P.  Continuum Damage-Healing Mechanics with Application to Self-Healing Composites, J. Damage Mechanics, 14(1):51-81, January 2005.
  3. Liu, X., Ma, L., Chang, K-M, and Barbero, E., Fatigue Crack Propagation of Ni-base Superalloys, Acta Metallurgica Sinica (English Letters), 18  p.55-64, February 2005.
  4. Barbero, E. J., Damiani, T. M., Trovillion, J., Micromechanics of fabric reinforced composites with periodic microstructure, Int. J. of Solids and Structures, 42 (2005) 2489-2504.
  5. Barbero, E. J., Abdelal, G. F., Caceres, A.  A Micromechanics approach for damage modeling of polymer matrix composites, Composite Structures, 67 (2005) 427-436.
  6. Liu, X., Barbero, E. J., Burris, M., Chang, K-M., and Sikka, V.,  Liquid Metal Corrosion of 316L Fe3Al and FeCrSi in Molten Zn-Al Baths, TMS Metallurgical and Materials Transactions A, ,36(a), (August 2005) 2049-2058.
  7. Xu, J., Li, X., Liu, X., Dong, C., Deem, N., and Barbero, E. J.,   X-ray photoelectron spectroscopy study of passive layers formed on Pb-Sn and Pb-Sb alloys, TMS Metalurgical Transactions A, 36(a) (August 2005) 2175-2190.
  8. Barbero, E. J. and Rangarajan, S.,   Long-Term Testing of Trenchless Pipe Liners, ASTM Journal of Testing and Evaluation, 33 (6), (Nov. 2005) 377-384.
  9. Barbero, E. J., Fatigue Crack Propagation Of Ni-Base Superalloys, Acta Metallurgica Sinica (English Letters), 2005.

PUBLICATIONS IN REFEREED JOURNALS (2004)

  1. Barbero, E. J. and Julius, M. J.   Time-Temperature-Age Behavior of Commercial Polymer Blends and Felt Filled Polymers, J. of Mechanics of Advanced Materials and Structures, volume 11, No. 3, pp. 287-300, May-June.
  2. Barbero, E. J. and Ford, K. J. Equivalent Time Temperature Model for Physical Ageing and Temperature Effects on Polymer Creep and Relaxation, ASME J. Eng. Mat. and Technology, vol. 126, pp. 413-410, October.
  3. Liu, X., Kang, B., Carpenter, W. and Barbero, E., Investigation of the Crack Growth Behavior of Inconel 718 by High Temperature Moiré Interferometry, J. of Materials Science, 39 (2004) 1967-1973.
  4. Long, Z., Liu, X, Yang, W., Chang, K-M, and Barbero E. J., Thermodynamic assessment of liquid composition change during solidification and its effect on freckle formation in superalloys, Materials Science and Engineering A 386, pp. 254-261.
  5. Barbero E. J., Irwin, C., Liu, X, Sikka, V. and Goodwin, F., Development of the Next Generation of Bath Hardware Materials, Iron and Steel technology vol. 10, pp. 31-37.
  6. Lonetti, P., Barbero, E. J., Zinno, R., and Greco, F., (8/2003) Interlaminar Damage Model For Polymer Matrix Composites, J. Composite Materials, 1485-1504, 37(16). ERRATA.

PUBLICATIONS IN REFEREED JOURNALS (2003)

  1. Barbero, E. J. and Wen, Ed A. (2003), Autofrettage to Offset Coefficient of Thermal Expansion Mismatch in Metal-Lined Composite Pipes, ASTM STP 1436, Composite Materials: Testing and Design: 193-204, ASTM, PA. Paper ID 19068.
  2. Barbero, E. J. and Damiani, T. (2003) Interaction Between Static Fatigue and Zero- Stress Aging in E-glass Fiber Composites, ASCE J. Composites for Construction, 7(1): 3-9.
  3. Barbero, E. J. and Damiani, T. (2003) Phenomenological Prediction of Tensile Strength of E-Glass Composites from Available Aging and Stress Corrosion Data, J. Reinforced Plastics and Composites, 22(4): 373-394.  

PUBLICATIONS IN REFEREED JOURNALS (2002)

  1. Barbero, E. J. and Lonetti, P., An Inelastic Damage Model for Fiber Reinforced Laminates, J. Composite Materials, April 2002; 36(8):941-962.
  2. Barbero, E. J. and Wen, Ed A. (2002) Compressive Strength of Production Parts without Compression Testing, ASTM STP 1383 Composite Structures: Theory and Practice, 470-483, ASTM, PA.
  3. Abdelal, G. F., Caceres, A., Barbero, E. J., A Micromechanics Damage Approach for Fatigue of Composite Materials, J. Composite Structures, 56(4) 2002 413-422.

PUBLICATIONS IN REFEREED JOURNALS (2001)

  1. Barbero, E. J. and DeVivo, L. (2001)  A Constitutive Model for Elastic Damage in Fiber-Reinforced PMC Laminae, J. of Damage Mechanics, 10(1) 73-93.
  2. Barbero, E. J. and Lonetti, P. (2001)  Damage Model for Composites Defined in Terms of Available Data, Mechanics of Composite Materials and Structures, 8(4), 299-316.

PUBLICATIONS IN REFEREED JOURNALS (2000)

  1. Barbero, E. J. and Turk, M. (2000) Experimental Investigation of Beam-Column Behavior of Pultruded Structural Shapes, J. Reinforced Plastic and Composites, 19(2), 249-265.
  2. Qiao, P, Barbero, E. J., and Davalos, J. F. (2000) On the Linear Viscoelasticity of Thin-Walled Laminated Composite Beams, J. Comp. Materials, 34(1), 39-68.
  3. Barbero, E. J. (2000) Prediction of Buckling-Mode Interaction in Composite Columns, Mechanics of Composite Materials and Structures, 7(), 269-284.
  4. Barbero, E. J., Dede, E. and Jones, S. (2000) Experimental Verification of Buckling-Mode Interaction in Intermediate-Length Composite Columns, I. J. Solid Structures, 37(), 3919-3934.
  5. Barbero, E. J., Compressive Strength of Composites for Aircraft Structures, World Market Series Business Briefing-Global Aerospace Technology, 96-100, London, 2000.
  6. Barbero, E. J. and Wen, Ed A. (2000) Compressive Strength of Production Parts without Compression Testing, ASTM STP 1383 Composite Structures: Theory and Practice, 470-483, ASTM, PA. ISBN: 0803128622.

PUBLICATIONS IN REFEREED JOURNALS (1999)

  1. Barbero, E. J. and DeVivo, L. (1999) Beam-Column Design Equations for Wide-Flange Pultruded Structural Shapes, ASCE J. Composites in Construction, 3(4), 185-191.
  2. Barbero, E. J., Makkapati, S., and Tomblin, J. S. (1999) Experimental Determination of Compressive Strength of Pultruded Structural Shapes, Composite Science and Technology, 59, 2047-2054.
  3. P. Qiao, J. F. Davalos, E. J. Barbero and D. Troutman, Step-by-Step Engineering Design Equations for FRP Structural Beams, Modern Plastics.  

PUBLICATIONS IN REFEREED JOURNALS (1998)

  1. Massa, J. and Barbero E. J., A Strength of Materials Formulation for Thin Walled Composite Beams with Torsion , Journal of Composite Materials, 32(17), 1560-1594 (1998).
  2. Barbero, E. J. and Trovillion, J., Prediction and Measurement of Post-Critical Behavior of Fiber Reinforced Composite Columns, Composite Science and Technology, special issue on Civil Infrastructural Applications of Composite Materials, 58(8), 1335-1341 (1998).
  3. Harris, J. and Barbero E. J., Prediction of Creep Properties of Laminated Composites from Matrix Creep Data, J. Reinforced Plastics and Composites, vol. 17(4), 361-379 (1998).
  4. Qiao, P., Davalos, J. F., and Barbero, E. J., Design Optimization of Fiber Reinforced Plastic Composite Shapes, J. Composite Materials, J. Composite Materials, 32(2), 177-196, 1998.
  5. Barbero, E. J. (1998)  Prediction of Compression Strength of Unidirectional Polymer Matrix Composites, J. Composite Materials, 32(5), 483-502. http://dx.doi.org/10.1177%2F002199839803200504
  6. Godoy, L. A., Almanzar, L. I. y Barbero, E. J. (1998) Postbuckling and First Ply Failure of Thin Walled Frames and Columns Made of Composite Materials, in: S. Shanmugam et al. Ed., Thin-Walled Structures: Research and Development, Elsevier, Oxford, pp. 297-303.

PUBLICATIONS IN REFEREED JOURNALS (1997)

  1. Tomblin, J. S., Barbero, E. J., and Godoy, L. A., Imperfection Sensitivity of Fiber Micro-Buckling in Elastic-Nonlinear Polymer-Matrix Composites, I. J. Solid Structures, 34(13), 1667-1679 (1997).
  2. Tomblin, J. S., and Barbero, E. J.,  Statistical Microbuckling Propagation Model for Compressive Strength Prediction of Fiber Reinforced Composites, ASTM STP 1242 (1997).
  3. Barbero, E. J. and Godoy, L. A.,  Influence of Bending-Extension Coupling on Buckling of Composite Columns, Mechanics of Composite Materials and Structures, 4(3), 191-207 (1997).
  4. Kim, Y., Davalos, J. F. and Barbero, E. J., Delamination Buckling of FRP Layer in Laminated Wood Beams Composite Structures, 37(3-4), 311-320 (1997).

PUBLICATIONS IN REFEREED JOURNALS (1996)

  1. E. J. Barbero, L. A. Godoy, and I. Raftoyiannis, Finite elements for three-mode interaction in buckling analysis, I.J. Num. Methods Engineering, 39, 469-488, 1996.
  2. Kim, Y., Davalos, J. F., and Barbero, E. J., Progressive Failure Analysis of Laminated Composite Beams,  J. Composite Materials, 30(5), 536-560, 1996.
  3. Davalos, J. F., Salim, H. A., Qiao, P., Lopez-Anido, R. and Barbero, E. J., Analysis and Design of Pultruded FRP Shapes under Bending, Composites Part B, 27B, 295-305, 1996.
  4. Barbero, E. J. and Tomblin, J., A Damage Mechanics Model for Compression Strength of Composites,  I.J. Solid Structures, 33(29), 4379-4393, 1996.
  5. Davalos, J. F., Qiao, P., and Barbero, E. J., Multi-objective Materials Architecture Optimization of Pultruded FRP I-Beams, Composite Structures, 35(3), 271-281, 1996.
  6. Sonti, S.S.; Barbero, E.J., Material Characterization of Pultruded Laminates and Shapes, J. of Reinforced Plastics and Composites, v 15, n 7, Jul, 1996, p 701-717.

PUBLICATIONS IN REFEREED JOURNALS (1995)

  1. R. Luciano and E. J. Barbero, Analytical Expressions for the Relaxation Moduli of Linear Viscoelastic Composites with Periodic Microstructure,  ASME J. Applied Mechanics, 62(3), 786-793, (1995)
  2. Sonti, S., Barbero, E. J., and Winegardner, T., Determination of Shear Properties for RP Pultruded Composites,  J. Reinf. Plastics and Comp., 14, 390-401, (1995)
  3. E. J. Barbero, R. Luciano, and E. Sacco, Three-Dimensional Plate and Contact/Friction Elements for Laminated Composite Joints, Computer and Structures, 54(4), 689-703, (1995).
  4. R. Lopez-Anido, J. F. Davalos, and E. J. Barbero, Experimental Evaluation of Stiffness of Laminated Composite Beam Elements under Flexure,  J. Reinf. Plastics and Comp., 14(4), 349-361, (1995).
  5. E. J. Barbero and R. Luciano, Micromechanical Formulas for the Relaxation Tensor of Linear Viscoelastic Composites with Transversely Isotropic Fibers,  I.J. of Solids Structures, 32(13), 1859-1872, (1995).
  6. L. A. Godoy, E. J. Barbero, and I. Raftoyiannis,  Interactive Buckling Analysis of Fiber-Reinforced Thin-Walled Columns,  J. Composite Materials, 29(5), 591-613, (1995).
  7. L. A. Godoy, E. J. Barbero, and I. Raftoyiannis,  Finite Elements for Post-Buckling Analysis-Part I: W-Formulation,  Computer and Structures, 56(6), 1009-1017, 1995.
  8. E. J. Barbero, I. Raftoyiannis, and L. A. Godoy,  Finite Elements for Post-Buckling Analysis-Part II: Applications to Composite Plate Assemblies,  Computer and Structures, 56(6), 1019-1028, 1995.
  9. Raftoyiannis, I.,  L. A. Godoy, and E. J. Barbero,  Buckling Mode Interaction in Composite Plate Assemblies,  Applied Mechanics Reviews, 52-60, 48 (11, Part 2), November (1995).
  10. J. F. Davalos, Y. Kim, and E. J. Barbero, A layerwise beam element for analysis of frames with laminated sections and flexible joints, J. Finite Elements in Analysis and Design, 19, 181-194, (1995).
  11. R. Zinno and E. J. Barbero, Total Lagrangean Formulation for Laminated Composite Plates Analyzed by 3D Finite Elements with 2D Kinematic Constraints, Computers and Structures, 57(3), 455-466, 1995.
  12. E. J. Barbero, Structural Design Equation for FRP Columns, Materials Engineering, 6(1-2), 197-210, 1995.

PUBLICATIONS IN REFEREED JOURNALS (1994)

  1. E. J. Barbero and I. Raftoyiannis,  Lateral and Distortional Buckling of Pultruded I-Beams,  Composite Structures, 27, 261-268, 1994.
  2. J. Tomblin and E. J. Barbero,  Local Buckling Experiments on FRP Columns, Thin-Walled Structures, 18, 97-116, 1994.
  3. E. J. Barbero and J. Tomblin,  A Phenomenological Design Equation for FRP Columns with Interaction Between Local and Global Buckling, Thin-Walled Structures, 18, 117-131, 1994.
  4. E. J. Barbero and R. Zinno,  Analysis of laminated composite plates with three-dimensional layer-wise constant shear elements,  International Journal of Engineering Analysis and Design, 1, 189-214, 1994.
  5. Y-C. Kim, J. F. Davalos, and E. J. Barbero, Composite beam element with layerwise plane sections,  ASCE Journal of Engineering Mechanics, 120(5), 1160-1166, May 1994.
  6. R. Zinno and E. J. Barbero,  A three-dimensional layer-wise constant shear element for general anisotropic shell-type structures,  Int. J. for Numerical Methods in Engineering, 37, 2445-2470, 1994.
  7. J. F. Davalos, Y-C. Kim, and E. J. Barbero,  Analysis of laminated beams with a layer-wise constant shear theory,  Composite Structures, 28, 241-253, 1994.
  8. E. J. Barbero, J. F. Davalos, and U. M. Munipalle,  Bond Strength of FRP-Wood Interface,  J. of Reinforced Plastics and Composites, 13(9), 835-854, 1994.
  9. R. Luciano and E. J. Barbero,  Formulas for the Stiffness of Composites with Periodic Microstructure,  I.J. of Solids Structures, 31(21), 2933-2944, (1994).

PUBLICATIONS IN REFEREED JOURNALS (1993)

  1. E. J. Barbero and I. Raftoyiannis, Local Buckling of FRP Beams and Columns,  ASCE J. of Materials in Civil Engineering, 5(3), 339-355, 1993.
  2. E. J. Barbero, R. Lopez-Anido, and J. F. Davalos, On the mechanics of thin-walled laminated composite beams,  Journal of Composite Materials, 27(8), 806-829, 1993.
  3. E. J. Barbero and K. Kelly, Predicting High Temperature Ultimate Strength of Continuous Fiber Metal Matrix Composites,  Journal of Composite Materials, 27(12), 1214-1235, 1993.
  4. E. J. Barbero and I. Raftoyiannis, Euler Buckling of Pultruded Composite Columns, Composite Structures, 24, 139-147, 1993.
  5. E. J. Barbero and J. Tomblin, Euler Buckling of Thin-Walled Composite Columns,  Thin-Walled Structures, 17, 237-258, 1993.
  6. K. Kelly and E. J. Barbero, The effect of fiber damage on the longitudinal creep of CFMMC,  Int. J. Solids Structures, 30(24), 3417-3429, 1993.
  7. C. I. Chen, V. H. Mucino and E. J. Barbero, Finite element vibration analysis of a helically wound tubular and laminated composite material beam, Computers and Structures, 49(3), 399-410, 1993.

PUBLICATIONS IN REFEREED JOURNALS (1992)

  1. E. J. Barbero, 3-D Finite Element for Laminated Composites with 2-D Kinematic Constraints,  Computers and Structures, 45(2), 263-271, 1992.
  2. E. J. Barbero and J. Tomblin, Buckling Testing of Composite Columns,  AIAA Journal TN, 30(11), 2798-2800, 1992.
  3. E. J. Barbero and H. V. S. GangaRao, Structural Applications of Composites in Infrastructure, Part II, SAMPE Journal, 28(1), 9-16, 1992.

PUBLICATIONS IN REFEREED JOURNALS (1991)

  1. E. J. Barbero, S-H Fu and I. Raftoyiannis, Ultimate Bending Strength of Composite Beams,  ASCE J. of Materials in Civil Engineering, 3(4), 292-306, 1991.
  2. E. J. Barbero, Pultruded Structural Shapes-From the Constituents to the structural behavior,  SAMPE Journal, 27(1), 25-30, 1991.
  3. L. A. Godoy, S. R. Idelsohn and E. J. Barbero, On Load Interaction in the Non-Linear Buckling Analysis of Cylindrical Shells,  Advanced Eng. Software TN, Vol. 13, No. 1, 46-50, 1991.
  4. E. J. Barbero and H. V. S. GangaRao, Structural Applications of Composites in Infrastructure,  Part I, SAMPE Journal, 27(6), 9-16, 1991.
  5. J. L. Teply, J. N. Reddy and E. J. Barbero, Bending, Vibration and Stability of ARALL Laminates using a Generalized Laminate Plate Theory,  Int. J. Solids Structures, 27(5), 585-599, 1991.
  6. E. J. Barbero and J. N. Reddy, Modeling of Delamination in Composites Laminates using a Layer-Wise Plate Theory,  Int. J. Solid Structures, 28(3), 373-388, 1991.
  7. E. J. Barbero and S. S. Sonti, Micromechanical Models for Pultruded Composite Beams,  AIAA-91-1045-CP, 124-129, 1991.
  8. E. J. Barbero and T. N. Gopalakrishnan, Eulerian Finite Element Formulation of the Fluid Mechanics in the Pultrusion Process,  AIAA-91-1043-CP, 101-107, 1991.

PUBLICATIONS IN REFEREED JOURNALS (1990)

  1. E. J. Barbero, G. H. Kaufmann, and S. R. Idelsohn, Fracture analysis of a surface-coated ceramic by speckle photography and finite elements,  Optics and Laser Technology, 22(1), 17-22, 1990.
  2. E. J. Barbero, J. N. Reddy, and J. L. Teply, An Accurate Determination of Stresses in Laminated Plates,  Int. J. for Numerical Methods in Engineering. 29, 1-14, 1990.
  3. E. J. Barbero, J. N. Reddy, and J. L. Teply, A General Two-Dimensional Theory of Laminated Cylindrical Shells, AIAA Journal, 28(3), 544-553, 1990.
  4. E. J. Barbero and J. N. Reddy, The Jacobian Derivative Method for Three-dimensional Fracture Mechanics, Communications in Applied Numerical Methods, 6, 507-518, 1990.
  5. E. J. Barbero and J. N. Reddy, Nonlinear Analysis of Composite Laminates Using a Generalized Laminates Plate Theory,  AIAA Journal, 28(11), 1987-1994, 1990.

PUBLICATIONS IN REFEREED JOURNALS (1987-1989)

  1. J. N. Reddy, E. J. Barbero and J. L. Teply, A Plate Bending Element Based on the Generalized Laminated Plate Theory, Int. J. Numerical Methods in Engineering, 28, 2275-2292, 1989.
  2. G. Kaufmann, A. M. Lopergolo, S. Idelsohn, and E. J. Barbero, Evaluation of Finite Element Calculations in a Part-Circular Crack by Coherent Optics Techniques, Experimental Mechanics, 27(2), 154-157, 1987. 

CONFERENCE PUBLICATIONS

CONFERENCE PUBLICATIONS (2013)

1.      Ever J. Barbero, Eduardo M. Sosa, And Gregory J. Thompson, Testing Of Full-Scale Confined Inflatable For The Protection Of Tunnels, VI International Conference On Textile Composites And Inflatable Structures, Munich, October 2013.

2.      A. M. Abad Blazquez, M. Herraez Matesanz, C. Navarro Ugena and E. J. Barbero, Acoustic emission characterization of intralaminar damage in composite laminates, p. 33-38, MATCOMP’13, July 2-5, 2013, Algeciras, Spain.

CONFERENCE PUBLICATIONS (2012)

1.      F. A. Cosso and E. J. Barbero, Computer Aided Design Environment for Composites, SAMPE 2012 Conference and Exhibition, Baltimore, May 21-24, 2012.

2.      E. J. Barbero and J. M. Gutierrez, Determination of Basis Values from Experimental Data for Fabrics and Composites, SAMPE 2012 Conference and Exhibition, Baltimore, May 21-24, 2012.

3.      K. L. Peil, E. J. Barbero and E. M. Sosa, Experimental Evaluation of Shear Strength of Woven Webbings, SAMPE 2012 Conference and Exhibition, Baltimore, May 21-24, 2012.

4.      X. Martinez, J. F. Davalos, E. J. Barbero, E. M. Sosa, W. W. Huebsch, K. Means, L. Banta, and G. Thompson, Inflatable Plug for Threat Mitigation in Transportation Tunnels, SAMPE 2012 Conference and Exhibition, Baltimore, May 21-24, 2012.

CONFERENCE PUBLICATIONS (2011)

1.      Polymer Skins with Switchable Roughness, SMASIS 2011.

CONFERENCE PUBLICATIONS (2010)

  1. Adumitroaie, A. and E. J. Barbero, Matrix Cracking in Laminated Composites of General Stacking Sequence Under General Loading, 2010 SAMPE University Research Symposium International Competition, May 17-20, 2010, Seattle, WA. Oral Presentation.
  2. Adumitroaie, A. and E. J. Barbero, Matrix Cracking in Laminated Composites of General Stacking Sequence Under General Loading, USNCTAM2010, June 27—July 2, 2010, College Park, PA. http://www.conferencetoolbox.org/USNCTAM2010/
  3. Barbero, E. J., D. Bruno, F. Greco, and G. Sgambitterra, A Finite Element Model to Predict Damage Evolution in Laminated Composites with Arbitrary Stacking Sequence, IV European Conference on Computational Mechanics ECCM, May 16—21 2010, Paris, France.
  4. E.J. Barbero -D. Bruno - F. Greco - G. Sgambitterra: "A Constitutive Model Able to Predict Damage Evolution in Symmetric Laminate with Arbitrary Stacking Sequence". Atti del XXXIX Convegno Nazionale AIAS, Maratea, 7-10 Settembre, 2010. ISBN 88-6093-074-9.

CONFERENCE PUBLICATIONS (2009)

  1. Campo, F. and Ever J. Barbero (February 11, 2009), Virtual Experiments for Silica Aerogels, SAMPE Chapter’s 14th Annual Student Symposium, University of Maryland, Baltimore County – UMBC. Oral Presentation.
  2. Rivas Murillo, J. S., Martina E. Bachlechner, Ever J. Barbero, Preparation of nanoporous systems for the study of the mechanical properties of silica aerogels by Molecular Dynamics simulations, 2009 APS March Meeting, Pittsburgh, PA, March 16–20, 2009, Abstract: http://meetings.aps.org/Meeting/MAR09/Event/93260
  3. Adumitroaie, A. and Ever J. Barbero (May 18-21, 2009), Modeling of Planar Woven Fabric Reinforced Composites, SAMPE ’09, Baltimore, MD, Proceedings.
  4. Campo, F. and Ever J. Barbero (June 24-27, 2009), Computational Scattering Experiments on Atomistic Material Models, The 2009 Joint ASCE-ASME-SES Conference on Mechanics and Materials, Virginia Tech, Blacksburg, VA, Proceedings.
  5. Cortes, D. H. and Ever J. Barbero (June 24-27, 2009), Analytical Damage Mechanics, The 2009 Joint ASCE-ASME-SES Conference on Mechanics and Materials, Virginia Tech, Blacksburg, VA,  Proceedings.
  6. Rivas Murillo, J. S., Ever J. Barbero, Martina E. Bachlechner (June 24-27, 2009), Modeling Silica Aerogels by Molecular Dynamics Simulations, The 2009 Joint ASCE-ASME-SES Conference on Mechanics and Materials, Virginia Tech, Blacksburg, VA, Abstract:  Proceedings.
  7. Ever J. Barbero, Adi Adumitroaie and Girolamo Sgambitterra (November 13-19, 2009), Analytical Damage Mechanics Analysis of Laminated Composites, ASME International Mechanical Engineering Congress and Exposition (IMECE 2009), Lake Buena Vista, FL. Oral Presentation.

CONFERENCE PUBLICATIONS (2008)

  1. John S. Rivas Murillo, Martina E Bachlechner, Ever J. Barbero, and Darran Cairns, Toughening of Silica Aerogels – Molecular Dynamics Simulations, ESM Anniversary Conference, Blacksburg, VA (2008). Proceedings.
  2. John S. Rivas Murillo, Martina E. Bachlechner, Ever J. Barbero, Darran Cairns, Towards Toughening and Understanding of Silica Aerogels – MD Simulations, 2008 ASME International Mechanical Engineering Congress & Exposition, Boston, MA, October 31st – November 6th, 2008, Abstract: http://www.asmeconferences.org/Congress08/TechnicalProgramOverview.cfm#304
  3. Barbero, E. J. (2008) Aerospace Engineering Education as a Prerequisite for Economic Development, 2nd COMEA, Chihuahua, Mexico.
  4. Barbero, E. J. (2008) Equivalent Time Temperature Theory for Polymer Creep Modeling, Universidad Carlos III, Madrid, Spain.
  5. Barbero, E. J. (2008) Analytical modeling and mechanical properties of woven fabric composite materials, Universidad della Calabria, Arcavacata di Rende, Italy.

CONFERENCE PUBLICATIONS (2007)

  1. Jing Xu, James G Hemrick, Mark Peters, Xingbo Liu, and Ever Barbero, Wetting and Reaction Characteristics of Al2O3/SiC Composite Refractories by Molten Aluminum and Aluminum Alloy, 31st ACS Cocoa Beach Conference, Jan. 2007.  
  2. Ever J. Barbero, Larry Banta, and Jacky Prucz, Outcome Portfolios as an Assessment Tool for ABET EC 2000 - A Four Year Study, ICEET, Kuwait, Nov. 8-11, 2007.
  3. Xavier Martinez, Sergio Oller, Ever J. Barbero, New Approach to Simulate Laminate Composites by Coupling the Classical Lamination Theory with the Serial/Parallel Mixing Theory, ECCOMAS Thematic Conference on Mechanical Response of Composites P.P. Camanho et.al. (eds.) Porto, Portugal, 12–14 September 2007.
  4. Joan Andreu Mayugo, Ever J. Barbero, and Daniel Trias, Meso-Mechanical Finite Element Modeling Of Fabric
  5. Reinforced Composites, ECCOMAS Thematic Conference on Mechanical Response of Composites P.P. Camanho et.al. (eds.) Porto, Portugal, 12–14 September 2007.

CONFERENCE PUBLICATIONS (2006)

  1. Ever J. Barbero and Kevin J. Ford, Identification of Self-healing Model for Fiber Reinforced Polymer Composites, SECTAM XXIII, Mayaguez, PR, May 21-23, 2006.
  2. Ever J. Barbero and Kevin Ford, Damage and Self Healing Behavior of Laminated Fiberglass Reinforced Polymer Composites, SES 2006, College Park, PA, Nov. 2006.

CONFERENCE PUBLICATIONS (2005)

  1. Ever J. Barbero, and Kevin J. Ford, Identification of Continuum Healing Mechanics for Polymer Matrix Composites, MACMAT 2005, Baton Rouge, LA, June.
  2. Kevin J. Ford, and Ever J. Barbero, Identification of Continuum Healing Mechanics for Polymer Matrix Composites, SAMPE 2005, Anaheim, CA, April.
  3. Z. Yao, B. S.-J. Kang, C. Feng, and E. J. Barbero, “Development Of An Indentation Method For Material Surface Mechanical Properties Measurement,  June 2005 ICSSD.
  4. X. Liu, J. Xu, N. Deem, K-M. Chang, E. Barbero, W-D. Cao, R. Kennedy & T. Carneiro: “Effect of Thermal-Mechanical Treatment on the Fatigue Crack Propagation Behaviors of Newly Developed Allvac 718Plus Alloy” Superalloys 718 and Derivatives 2005, TMS (October 2005) 233-242
  5. X. Liu, C. Irwin, E. Barbero, B. Kang: “Minimizing Dross Buildup on Rotating Galvanizing Bath Hardware”, ILZRO-GAP 2005, (October 2005) Lexington, KY

CONFERENCE PUBLICATIONS (2004)

  1. Barbero, E. J., Banta, L., Prucz, J. and Stanley, C., Outcome Portfolios as an Assessment Tool for ABET EC-2000, ASEE, Salt Lake City, June.
  2. E. J. Barbero, X. Liu, T. M. Damiani (WVU) and F. Goodwin (ILZRO), Current research on zinc pot hardware and molten metal containment, Galvanizers Association Annual Meeting.
  3. J.M. Snider, J.L. Loth, E.J. Barbero, R. Kamil, Zinc-Pot Bearing Material Wear-Test Results Using the WVU Small-Scale Tester, Galvatech’04, Chicago
  4. Barbero, E. J. and Ford, K, Equivalent Time Temperature Theory for Polymer Creep Modeling, SAMPE, CA, April
  5. Barbero, E. J., Ford, K. and Stiller, A., Continuum Damage Healing Mechanics for Modeling of Self-Healing Composites, SAMPE, CA, April
  6. Barbero, E. J., Mayugo-Majo, J. A., Lonetti, P., Three-Dimensional Continuum Damage Model For Polymer Matrix Composites, ASME IMECE-2004-59171, Anaheim, CA, Nov.
  7. Barbero, E. J., Prucz, J., Banta, L., Stanley, C., Mukherjee, N., Abet Ec-2000 Assessment Using Outcome Portfolios, ASME IMECE-2004-59170, Anaheim, CA, Nov.
  8. E.J. Barbero, F. Greco, P. Lonetti, An elasto-damaged model for self-healing fiber reinforced polymeric laminate. Proceedings of CCC2003, Composites in construction international conference, September 16-19, 2003, University of Calabria, Faculty of Engineering - Department of Structural Engineering Rende (CS) – Italy. ISBN 88-7740-358-6
  9. Barbero E.J. - D. Bruno -F. Greco - P. Lonetti: A constitutive model for inelastic self-healing composites. Conferenza annuale ISCS 2003.

CONFERENCE PUBLICATIONS (2003)

  1. Barbero, E. J., Keynote Speaker, International Conference for Composites in Construction, Calabria, Italy, September.
  2. Barbero, E. J., Liu, X., Irwin, C. Sikka, V. and Goodwin, F. 2003 AISE Annual Convention, Pittsburg, PA, September.
  3. Barbero, E. J. and Lonetti, P. Application of Continuum Damage Healing Mechanics To Self-Healing Composites, ASME IMECE 2003-43738, Washington, DC, November 2003.
  4. Barbero, E. J. and Kevin J. Ford, Accelerated Creep Testing of Trenchless Liners, ASCE IPC, Baltimore, MD, July 2003.
  5. Barbero, E. J., Julius, M. and Yao, Z. Time and Frequency Viscoelastic Behavior of Commercial Polymers, CCC-2003, Calabria, Italy, September 2003.
  6. Barbero, E. J., Ford, K. J., Julius, M. and Rangarajan, S. Equivalent Time Temperature Theory for Polymer Creep Modeling, ASME IMECE 2003 (oral presentation), Washington, DC, November 2003.
  7. Barbero, E. J., Sikka, V. and Goodwin, F. Performance Evaluation of Current Hot-dip Pot Hardware Materials, Galvanizers Association Annual Meeting, Monterrey, Mexico, October 2003.
  8. Barbero, E. “Improved Corrosion resistance of Galvanized Pot Hardware,” ZCO-15-2, Galvanized Auto-body partnership, Monterrey, Mexico, October 2003.

CONFERENCE PUBLICATIONS (2002)

  1. Ever J. Barbero and Ed Wen (March 2002), Coefficient of Thermal Expansion Compatibility Through Mechanical and Thermal Autofrettage in Metal Lined Composite Pipes, ASTM, Pittsburgh, PA.
  2. Ed Wen, Ever Barbero, and Philip Tygielski, (April 2002) Autofrettage to Counteract Thermal Expansion Mismatch in Metal-Lined Composite Cryogenic Feed Lines, AIAA 2002-1524, SDM Conference, Denver, CO.
  3. J. Trovillion, J. B. Berman and E. J. Barbero, (December 2002) A Novel Micromechanical Model for Woven Fabric Composite Materials Based on Homogenization with Periodic Microstructures, Paper AP-17, 23rd Army Science Conference, December 2-5, Orlando, FL.
  4. Barbero, E. J. and Rangarajan, S. Proceedings of IPC2002: International Pipeline Conference, September 29 - October 3, 2002, Calgary, Alberta, Canada, paper #27064.
  5. Barbero, E. J. and Ford, K. J. Accelerated Creep Testing Of Trenchless Liners, SAMPE Technical Conference, Baltimore, MD, 2002.

CONFERENCE PUBLICATIONS (2001)

  1. E. J. Barbero and J. Trovillion, Experimental Methods for Buckling and Post-Buckling of Composite Structural Shapes, ASC, Blacksburg, VA, Sept 9-12,2001.

CONFERENCE PUBLICATIONS (2000)

  1. E. J. Barbero, Prediction of the Interaction Constant for the Analysis of Composite Columns, Ottawa, Canada, August 2000.
  2. L. A. Godoy and E. J. Barbero, Singapore, 2000.
  3. E. J. Barbero, and S. Makkapati, Robust Design Optimization of Composite Structures, SAMPE 2000, Anaheim, CA.

CONFERENCE PUBLICATIONS (1999)

  1. E. J. Barbero and J. S. Harris, Prediction Of Long-Term Creep Of Composites From Doubly-Shifted Polymer Creep Data, 683-685, PACAM VI, Rio de Janeiro, Brazil, January 4-8, 1999.
  2. J. C. Massa and E. J. Barbero, A Practical Formulation For Thin-Walled Composite Beams, 589-592, PACAM VI, Rio de Janeiro, Brazil, January 4-8, 1999.
  3. P. Qiao, E. J. Barbero and J. F. Davalos, Analytical and Experimental Study of Creep Behavior of FRP Composite Shapes under Bending, 605-608, PACAM VI, Rio de Janeiro, Brazil, January 4-8, 1999.
  4. P. Qiao, J. F. Davalos, E. J. Barbero and D. Troutman, Step-by-Step Engineering Design Equations for FRP Structural Beams, ICE'99, Cincinnati, OH, May 10-12, 1999. Best Paper of the design categroy and Best Paper overall for the conference.
  5. E. J. Barbero and D. Troutman, Beam-Column Design Equations for Pultruded Structural Shapes, ICE'99, Cincinnati, OH, May 10-12, 1999.
  6. E. J. Barbero and E. Wen, Accurate Compressive Strength of Production Parts without Compression Testing, ASTM Symposium on Composite Structures, Theory and Practice, Seattle, WA, May 17-18, 1999.

CONFERENCE PUBLICATIONS (1998)

  1. J. S. Harris and E. J. Barbero, Modeling Viscoelastic Effects Of Polymer Matrix Composites Using A Two Parameter Superposition Method, CDCC 98, Sherbrooke, Quebec, August 4-8, 1998.
  2. J. F. Davalos, P. Qiao, E. J. Barbero, D. Troutman, and L. Galagedera, Design of FRP Beams in Engineering Practice, Int. Composites Exposition 98, pp. 12-E/1-6, SPI-CI, Nashville, TN, January 19-21, 1998.
  3. L. A. Godoy, L. I. Almanzar, and E. J. Barbero, Post-Buckling and First-Ply Failure of Thin-Walled Frames and Columns Made of Composite Materials, Thin-Walled Structures: Research and Development, pp. 297-303, editor: N. E. Shanmugam, Elsevier (1998), II International Conference on Thin-Walled Structures, Singapore, December 2-4, 1998.

CONFERENCE PUBLICATIONS (1997)

  1. Caceres-Fernandez and E. J. Barbero, A Damage Mechanics Models for ACM-Wood Hybrid Beams, Pacam V, San Juan, P. P., January 2-4, 1997.
  2. E. J. Barbero and D. Evans, Guidelines for Design of FRP Columns, ASCE Structures Congress, Portland, OR, April 13-16, 1997.
  3. R. Lopez-Anido, H. V. S. GangaRao, and E. J. Barbero, FRP Modular System for Bridge Decks, ASCE Structures Congress, Portland, OR, April 13-16, 1997.
  4. E. J. Barbero, et al., Reinforcement with ACM for Blast Loads, ASCE Structures Congress, Portland, OR, April 13-16, 1997.

CONFERENCE PUBLICATIONS (1996)

  1. P. Qiao, J. F. Davalos, and E. J. Barbero, Optimal Design of FRP Shapes for Structural Applications, ICCI'96, Tucson, AZ, 15-17 January 1996.
  2. E. J. Barbero, J. Massa and J. S. Tomblin, Microbuckling Propagation Models for Compression Strength of Polymer Matrix Composites, ASME WAM, Atlanta, GA, 17-23 November 1996.

CONFERENCE PUBLICATIONS (1995)

  1. L. A. Godoy, E. J. Barbero, and I. Raftoyiannis, Post-Buckling Analysis of Composite FRP Structures, PACAM, Buenos Aires, Argentina, January 3-6, 1995.
  2. E. J. Barbero, Compression Strength of Fiber Reinforced Composites, PACAM, Buenos Aires , Argentina, January 3-6, 1995.
  3. S. S. Sonti, E. J. Barbero, and T. Winegardner, Mechanical Properties of Pultruded E-Glass/Vinyl Ester Composites, 50th Annual Conference, Composites Institute, The Society of the Plastics Industry, pp. 10-C/1-7, Feb. 1, 1995.
  4. E. J. Barbero, J. S. Tomblin, R. Allison, J. Gauchel, and J. Mitrey, Compression Strength of Pultruded RP Rods, 50th Annual Conference, Composites Institute, The Society of the Plastics Industry, pp. 4-B/1-5, Feb. 1, 1995.
  5. E. J. Barbero, D. Evans, and S. Makkapatti, Buckling and Shear Tests Methods and Design Equations for Pultruded Shapes, NSF Sponsored First National Conference and Workshop on Research into Practice, Cristal City, VA, June 15-16, 1995.
  6. H. A. Salim, J. F. Davalos, P. Qiao, and E. J. Barbero, Experimental and analytical evaluation of laminated composite box beams, 40th Int. SAMPE Symposium, May 8-11, 1995, Anaheim, CA.
  7. J. S. Tomblin and E. J. Barbero, Compression Strength of Pultruded Fiber Reinforced Composites, pp. 74-77, 10th ASCE Engineering Mechanics Conference, Boulder, CO, May 21-24, 1995.
  8. H. A. Salim, J. F. Davalos, E. J. Barbero, R. Lopez-Anido, and P. Quiao, Design of FRP Shapes for Civil Structures, pp. 405-408, 10th ASCE Engineering Mechanics Conference, Boulder, CO, May 21-24, 1995.
  9. R. Zinno and E. J. Barbero, Nonlinear Analysis of Laminated Composite Structures Using a Layerwise Theory, pp. 537-540, 10th ASCE Engineering Mechanics Conference, Boulder, CO, May 21-24, 1995.

CONFERENCE PUBLICATIONS (1994)

  1. S. S. Sonti, E. J. Barbero, and T. Winegardner, Determination of Shear Properties for RP Pultruded Composites, 49th Annual Conference, Composites Institute, The Society of the Plastics Industry, pp. 2-A/1-5, Feb. 7-9, 1994.
  2. Scott R. Taylor and Ever J. Barbero, Tension Rod End Attachments Formed via Reforming Pultruded Thermoplastic Composite Rods, 49th Annual Conf., Composites Institute, The Society of the Plastics Industry, pp. 14-B/1-3, Feb. 7-9, 1994. Best Advanced Composites Paper Award
  3. Barbero, E. J., Luciano, R., and Sacco, E., Applications of Composites in Civil Engineering, International Conference on Composite Materials, May 3-5, 1994, Milan, Italy.
  4. Godoy, L. A., and Barbero, E. J.,  Stability of Composite FRP Columns,  Joint EPSCOR and AAAS Annual Meeting, University of Puerto Rico, Mayaguez, PR, May 6-7, 1994.
  5. Godoy, L. A., Barbero, E. J., and Raftoyiannis, I., 1995, Post-Buckling Analysis of Composite FRP Structures, Proceedings Pan American Congress of Applied Mechanics, Buenos Aires January 3-6, 1995.
  6. Barbero, E. J., 1995, Compression Strength of Pultruded Fiber Reinforced Composites, Proceedings Pan American Congress of Applied Mechanics, Buenos Aires January 3-6, 1995.
  7. Barbero, E. J., and Davalos, J. F., 1994, Bond strength of FRP-wood interface: model and experiments, XXIII AIAS Conference, Rende, Italy, 21-24, 1994.
  8. Barbero, E. J., 1994, Pultruded Structural Shapes: A State of the Art Keynote Lecture at XXIII AIAS Conference, Rende, Italy, 21-24, 1994.
  9. Barbero, E. J. and Tomblin, J., 1994, Compression Strength of Pultruded FRP Materials, 1994 ASCE Materials Engineering Conference, November 13-16, San Diego, CA, 1994.
  10. Faza, S, H. GangaRao, and E. J. Barbero (speaker), Fiber Composite Wrap for Rehabilitation of Concrete Structures, Invited Lecture at the Conference-Workshop Repair and Rehabilitation of the Infrastructure of the Americas, Mayaguez, PR, August 29-31, 1994.

CONFERENCE PUBLICATIONS (1993)

  1. K. Kelly and E. Barbero,  Longitudinal creep and strength of continuous fiber MMCs,  38th Int. SAMPE Symposium, Anaheim, CA, May 8-13, 1993.
  2. P. Burnside, E. Barbero, J. Davalos, and H. GangaRao,  Design optimization of an all-FRP bridge,  38th Int. SAMPE Symposium, Anaheim, CA, May 8-13, 1993.
  3. E. Barbero and J. Tomblin,  Compressive strength models for pultruded fiber reinforced composites,  38th Int. SAMPE Symposium, Anaheim, CA, May 8-13, 1993.
  4. P. Burnside, E. Barbero, and J. Davalos,  Design optimization of an all-composite short-span bridge,  ASCE Structures Congress, Irvine, CA, April, 1993.
  5. E. J. Barbero and R. Ritchey,  A Universal Design Equation for FRP Columns,  48th Annual Conference, Composites Institute, The Society of Plastics Industry, Inc., February 8-11, 1993.
  6. P. Burnside and E. Barbero,  Design optimization of an All-FRP Bridge,  ANSYS Technical Note, April 1993.
  7. E. Barbero, I. Raftoyiannis, and L. Godoy,  Mode interaction in FRP columns,  in Mechanics of Composite Materials: Nonlinear Effects, Ed. M. H. Hyer, AMD-Vol. 159, 9-18, ASME, New York, 1993.
  8. E. Barbero and K. Kelly,  Predicting longitudinal creep and strength of a continuous fiber metal matrix composite,  in Mechanics of Composite Materials: Nonlinear Effects, Ed. M. H. Hyer, AMD-vol 159, ASME, New York, 1993.
  9. J. F. Davalos, E. J. Barbero, U. Munipalle, and H. Salim,  Interface bond strength of laminated wood-FRP composite beams,  25 Int. SAMPE Technical Conference, October 26-28, 1993, Philadelphia, PA.
  10. E. J. Barbero,  Composites in Construction,  Keynote Speaker, 25 Int. SAMPE Technical Conference, October 26-28, 1993, Philadelphia, PA.
  11. Raftoyiannis, and E. J. Barbero,  Lateral-distortional buckling of fiber reinforced beams,  1993 ASME Winter Annual Meeting, New Orleans, LA, November 1993, AD-Vol 37, AMD-Vol 179, 219-227.

CONFERENCE PUBLICATIONS (1992)

  1. E. J. Barbero and J. Tomblin,  Data reduction methods for local buckling of FRP columns,  10th Structures Congress, ASCE, San Antonio, April 13-15, 1992.
  2. E. J. Barbero, J. Tomblin and R. Ritchey,  Local buckling of FRP structural shapes,  47th Annual Conference, Composites Institute, The Society of Plastics Industry, Inc., February 3-6, 1992.
  3. E. J. Barbero, J. Davalos, P. Burnside, and H. V. S. GangaRao, IV Workshop on Bridge Engineering Research in Progress, Reno, Nevada, 1992.

CONFERENCE PUBLICATIONS (1991)

  1. Sotiropoulos S., H. V. S. GangaRao and E. J. Barbero,  Static Response of Bridge Superstructures made of Fiber Reinforced Plastic,  Use of Composite Materials In Transportation Systems, AME-Vol. 29, 57-66, S.B. Biggers and T-W Chou Ed., ASME, N.Y., 1991.
  2. E. J. Barbero,  3-D Finite Element Modeling of Laminated Composites by Layer-Wise Constant Shear Elements,  in Enhancing Analysis Techniques for Composite Materials, NDE-Vol. 10, 229-237, Schwer, Reddy, and Mal Ed., ASME, N.Y., 1991.
  3. J.F. Davalos and E. J. Barbero,  A Constitutive Model for Glulam-Timber/Glass-FRP Beams,  with J. F. Davalos, Third International Conference on Constitutive Laws for Engineering Materials, Tucson, Arizona, January 1991.
  4. J.F. Davalos and E. J. Barbero,  Development of Composite Glulam-GFRP Beams,  with J. Davalos, Second Pan American Congress of Applied Mechanics, January 2-5, 1991, Valparaiso, Chile.
  5. E. J. Barbero,  Timoshenko Beam Stiffnesses for Laminated Structural Shapes,  Nineth ASCE Structures Congress, April 29-May 1st, 1991, Indianapolis , Indiana.
  6. E. J. Barbero,  A New Finite Element formulation of GLPT,  ASCE Eng. Mech. Specialty Conf. Mech. Computing in 1990's and Beyond, May 19-22, 1991, Columbus, OH, H. Adeli and R. L. Sierakowski Ed.
  7. E. J. Barbero,  Pultruded Structural Shapes: Stress Analysis and Failure Prediction,  Advanced Composite Materials in Civil Engineering Structures, S. L. Iyer Ed., ASCE, N. Y., pp. 194-204, 1991.
  8. E. J. Barbero,  Optimization of Pultruded Composite Beams and Columns,  36th Int. SAMPE Symposium, 1343-1354, 36(2), 1991.
  9. E. J. Barbero and H. V. S. GangaRao, Characterization and Modeling of Glass Fiber Reinforced Structural Components and Systems, II Workshop on Bridge Engineering Research in Progress, Reno, Nevada, October 29-30, 1990.

CONFERENCE PUBLICATIONS (1990)

  1. E. J. Barbero and S-H. Fu,  Local Buckling as Failure Initiation on Pultruded Composite Beams,  Impact and Buckling of Structures, Ed. D. Hui, ASME AD-Vol. 20, AMD-Vol. 114, 41-46, 1990.
  2. E. J. Barbero and I. Raftoyiannis,  Buckling Analysis of Pultruded Composite Columns,  Impact and Buckling of Structures, Ed. D. Hui, ASME AD-Vol. 20, AMD-Vol. 114, 47-52, 1990.
  3. E. J. Barbero,  Characterization and Modeling of Glass Fiber Reinforced Plastic Beams and Columns,  Second Workshop on Bridge Engineering Research in Progress, Reno, Nevada, October, 1990.
  4. J. N. Reddy and E. J. Barbero,  Modeling of Delamination in Composites Laminates using a Layer-Wise Plate Theory,  INDO-U.S. Workshop on Composites for Aerospace Applications, Indian Institute of Science, Bangalore, India, July 23-27, 1990.
  5. E. J. Barbero and J. N. Reddy,  A Study of Delamination Buckling in Composite Laminates Using the Generalized Laminated Plate Theory,  presented at SECTAM XV, Atlanta, GA, March 1990.

CONFERENCE PUBLICATIONS (1989)

  1. E. J. Barbero, H Fu, J. Prucz, and C. Spyrakos,  Structural Performance of I-Beams made of Fiber Reinforced Plastics (FRP),  ASCE Structures Congress, Baltimore, MD, March 1/5, 1990.
  2. E. J. Barbero and J. N. Reddy,  Vibrations of Laminated Composite Plates Using a Generalized Laminated Plate Theory , AD/Vol. 14, 35/40, ASME Winter Annual Meeting, San Francisco, CA, December 10/15, 1989.
  3. J. N. Reddy, J. L. Teply, and E. J. Barbero,  An Accurate Determination of Stresses in ARALL Laminates Using a Generalized Laminated Plate Theory , ASCE/ASME AMD Vol. 100, pp. 55/62, Third ASCE/ASME Joint Mechanics Conference, San Diego, CA, July 9/12, 1989.
  4. J. N. Reddy, J. L. Teply, and E.J. Barbero, General Nonlinear Theory of Laminated Anisotropic Composite Plates, Proceedings of the First USSR/US Symposium on Mechanics of Composite Materials, ed. by S. W. Tsai, Riga, Latvian USSR, May 23/26, 1989.
  5. A Plate Bending Element Based on the Generalized Laminated Plate Theory (Implementation into ABAQUS Computer Program) , Center for Composite Material and Structures Report, CCMS/89/08, VPI/E/89/02, 1989.
  6. J. N. Reddy and E. J. Barbero,  Nonlinear Analysis of Composite Plates using the Generalized Laminate Plate Theory , Proceedings of the VIth Annual Review of the Center for Composite Materials and Structures, Blacksburg, VA, April 9/11, 1989.
  7. J. N. Reddy and E. J. Barbero,  A Computational Model for the Study of Local Effects , presented at International Conference on Engineering Software 89, New Delhi, India, December 4/7, 1989.
  8. E. J. Barbero and J. N. Reddy,  An Application of the Generalized Laminate Plate Theory to Delamination Buckling , presented at the IVth Technical Conference of the American Society of Composites, Blacksburg, VA, October, 1989.
  9. E. J. Barbero and J. N. Reddy,  An Application of the Generalized Laminate Plate Theory to Delamination Buckling , presented at the IVth Technical Conference of the American Society of Composites, Blacksburg, VA, October, 1989.

CONFERENCE PUBLICATIONS (-1988)

  1. E. J. Barbero and J. N. Reddy,  A Generalized Laminated Theory for the Analysis of Composite Laminates, Center for Composite Material and Structures Report, CCMS/88/12, VPI/E/88/17, 1988.
  2. J. N. Reddy, J. L. Teply, and E. J. Barbero,  On Analytical Modeling of Thick Composites , Third International Conference on CAD/CAM Robotics and Factories of the Future, MI, August 14/17, 1988.
  3. J. N. Reddy, and E. J. Barbero,  A Variational Principle and Associated Computational Model for the Generalized Laminate Plate Theory , ASCE Engineering Mechanics Division Specialty Conference, Blacksburg, VA, May 22/25, 1988.
  4. E. J. Barbero and J. N. Reddy, A General Nonlinear Theory of Laminated Anisotropic Composite Plates , Proceedings of the IVth Annual Review of the Center for Composite Material and Structures, Blacksburg, VA, April 11/14, 1987.
  5. E. J. Barbero,  A Modified Arc-Length Method for the Solution of Nonlinear Systems , IVth National Conference on Finite Elements and its Applications, ENIEF' 86, Bariloche, Argentina, July 9/13, 1986.
  6. G. Kaufmann, S. Idelsohn and E. J. Barbero,  Evaluation of Finite Element Calculations on a Curved-Fronted Crack by Coherent Optics Techniques , Proceedings of the VIIIth International Conference on Experimental Stress Analysis, Ed. by H. Wieringa, Amsterdam, The Netherlands, 370/386, 1986.
  7. E. J. Barbero,  Three-dimensional Analysis of Curved-Fronted Cracks using the Finite Element Method , First Latin American Congress of Computational Mechanics, MECOM '85, Parana, Argentina, October 15/18, 1985.
  8. E. J. Barbero,  Composite Pressure Vessel for CNG Storage, Analysis and Design , IIIth National Conference on Finite Elements and its Applications, ENIEF '85, Bariloche, Argentina, July 8/12, 1985.

REPORTS

OTHER PRESENTATIONS